PLANET  Internet Camera Firmware Release
============================
Firmware Release Version: V6.M.2.10469
Release Date            : 2013/3/28

Improved Features 
1. Improve night mode image quality.
2. Manual exposure could support 1/2 S.
3. 2M series support 720P mode.
4. Add new web page : Setting -> Protocol, support ONVIF & SNMP
5. ActiveX support Safari, Firefox, Opera and Chrome.
6. Improve HTTPS performance.

Fixed Bugs 
1. ONVIF - multicast can not work.
2. Streaming timestamp is not accurate.
3. Win8 - Correct profile setting interface.
4. Win8 - PTZ function can not work.
5. Win8 - IPv6 can not work.
6. HTTPS - IP filter can not work.

============================
Firmware Release Version: V6.M.2.9715
Release Date            : 2012/11/13

Improved Features 
  
1. Improve WDR translation 
2. Improve overlay image user interface. Setting->Video->Overlay Image  
3. Default enable WDR function. 
 
  
Fixed Bugs 
  
1. Bitrate is almost the same in H264 high/main/baseline profile.  
2. Multicast connection count is wrong.  
3. Always multicast function can not work.  
4. Iris calibration unstable. 
5. Can not change video codec.  
6. Reduce exposure value to avoid over exposure situation. 

============================
Firmware Release Version: V6.M.2.9156
Release Date            : 2012/8/31

Improved Features :
1. Add camera tampering function.
2. Add audio detection function.

============================
Firmware Release Version: V6.M.2.8786
Release Date            : 2012/6/11


Initial release

-----------------------------

Firmware Upgrade Procedure:
========================
Step 1. Login camera web management page.
Step 2. Browse to "System  -> Maintenance" configuration page.
Step 3. Click "Browse..." of Firmware Upgrade to find the firmware file location.
Step 4. Click "Upload Firmware" to load firmware into machine.
Step 5. When firmware upgrade finish that machine will reboot automatic.
Step 6. It's suggest reset machine to factory default for newly function properly.


**** Note ****
1. Do not turn the power off during the upgrade process. This will damage the unit.
2. After upgraded, please restart machin with a cold reboot for firmware reload properly.


Thanks for choosing PLANET products, any comment or feedback will be appreciated.


Best Regards,

PLANET Tech Support Team

Technical support: support@planet.com.tw